How To Measure For Kitchen Countertops

Accurate measurements are essential when ordering kitchen countertops. Improperly measured countertops can lead to costly errors and delays. The key to successful countertop measurements is to measure thoroughly and carefully, paying attention to detail.

Gather Your Tools: Before you begin, be sure to assemble the necessary tools. You will need a measuring tape, a level, a pencil or pen, and a notepad. A laser measure can also be helpful for taking precise measurements.

Plan Your Measurements: Before you take any measurements, you need to have a plan. Determine where the countertops will be installed and what shape they will be. Sketch out a diagram of the area to be measured, indicating the location of all appliances, cabinets, and walls.

Measure the Length: Start by measuring the length of the countertop. Measure from the inside edge of one cabinet to the inside edge of the opposite cabinet. Be sure to measure along the wall, not across the cabinets. Write down the measurement in inches. Repeat this step for all sections of the countertop.

Measure the Depth: Next, measure the depth of the countertop. Measure from the front edge of the countertop to the back edge. Be sure to measure from the top surface of the countertop, not from the bottom. Write down the measurement in inches. Repeat this step for all sections of the countertop.

Measure the Height: Finally, measure the height of the countertop. Measure from the floor to the top surface of the countertop. Be sure to measure in the center of the countertop, not at the edges. Write down the measurement in inches. Repeat this step for all sections of the countertop.

Measure the Backsplash: If you are also installing a backsplash, you will need to measure for it as well. Measure the height of the backsplash from the countertop to the bottom of the upper cabinets. Measure the length of the backsplash from the end of one cabinet to the end of the opposite cabinet. Write down the measurements in inches.

Note Obstructions: As you are measuring, be sure to note any obstructions that could affect the installation of the countertops. This could include appliances, sinks, or windows. Write down the location and dimensions of any obstructions.

Double-Check Your Measurements: Once you have taken all of your measurements, double-check them to make sure they are accurate. It is better to catch any errors now than after the countertops have been ordered and installed.

Creating a Template: In addition to the measurements, you may also want to create a template of the countertop area. This can be helpful for the countertop fabricator to visualize the layout and ensure a proper fit.

Ordering Your Countertops: Once you have all of your measurements, you can order your countertops. Be sure to provide the measurements and any other pertinent information to the fabricator.

By following these steps, you can ensure that you have accurate measurements for your kitchen countertops. This will help to ensure a smooth and successful installation.