How To Cover Countertops With Contact Paper

Contact paper is a self-adhesive paper that comes in a variety of colors and patterns. It is often used to cover shelves, drawers, and other surfaces. Contact paper can also be used to cover countertops, and it is a relatively easy and inexpensive way to update the look of your kitchen.

Here are the steps on how to cover countertops with contact paper:

1. Clean the countertop.

The first step is to clean the countertop thoroughly. This will help the contact paper to adhere properly. Use a degreaser to remove any grease or dirt, and then rinse the countertop with water. Allow the countertop to dry completely before proceeding.

2. Measure and cut the contact paper.

Measure the countertop and cut the contact paper to size. It is important to cut the contact paper slightly larger than the countertop, so that you can trim it to fit once it is applied.

3. Peel off the backing of the contact paper.

Start by peeling off a small section of the backing of the contact paper. Be careful not to touch the adhesive, as this can cause it to become less sticky.

4. Apply the contact paper to the countertop.

Starting at one corner of the countertop, apply the contact paper to the surface. Smooth out the contact paper as you go, and use a squeegee to remove any air bubbles.

5. Trim the contact paper.

Once the contact paper is applied, trim it to fit the countertop. Use a sharp knife to cut the contact paper around the edges of the countertop.

6. Seal the edges of the contact paper.

To prevent the contact paper from peeling up, seal the edges with a clear sealant. You can use a silicone sealant or a clear epoxy resin.

7. Allow the contact paper to cure.

Allow the contact paper to cure for at least 24 hours before using the countertop. This will give the sealant time to dry and harden.

Here are some tips for covering countertops with contact paper:

Use a sharp knife to cut the contact paper. A dull knife can tear the contact paper.
Be careful not to touch the adhesive on the contact paper. This can cause it to become less sticky.
Smooth out the contact paper as you apply it to the countertop. This will help to prevent air bubbles.
Use a squeegee to remove any air bubbles from the contact paper.
Trim the contact paper to fit the countertop. A sharp knife can be used to cut the contact paper around the edges of the countertop.
Seal the edges of the contact paper with a clear sealant. This will help to prevent the contact paper from peeling up.
Allow the contact paper to cure for at least 24 hours before using the countertop. This will give the sealant time to dry and harden.