Aquasana Countertop Water Filter Replacement

Aquasana's countertop water filtration systems effectively remove impurities from tap water, providing cleaner, healthier drinking water. Regular filter replacement is crucial to ensure optimal performance and protect the system from damage. This guide will provide step-by-step instructions for replacing an Aquasana countertop water filter.

Materials Required

* New Aquasana filter cartridge * Spare O-rings (optional) * Clean cloth or paper towels * Bucket or bowl (for draining water)

Replacement Instructions

Disconnect the system: Turn off the water supply valve at the sink. Disconnect the water line from the cold water tap by rotating it counterclockwise.
Empty the unit: Open the dispense tap to drain the remaining water from the system into a bucket or bowl.
Unscrew the filter housing: Use a filter wrench or your hand to unscrew the filter housing (counterclockwise). Remove the old filter cartridge.
Inspect the O-rings: Check the O-rings on the old cartridge and housing for any damage or wear. Replace them if necessary.
Install the new cartridge: Insert the new cartridge into the housing, aligning the notch on the cartridge with the corresponding tab in the housing.
Retighten the housing: Hand-tighten the housing (clockwise) until snug. Avoid overtightening as it may cause damage.
Reconnect the water line: Reconnect the water line to the cold water tap and tighten it securely.
Turn on the water supply: Slowly open the water supply valve and allow water to flow through the system for approximately 10 minutes to purge any air and activated carbon from the cartridge.
Flush the system: Continue flushing the system for another 5 minutes to remove any impurities and ensure that the water is clear and tasteless.
Check for leaks: Once flushed, inspect all connections for any leaks. If necessary, adjust the connections or replace the O-rings.

Tips

* Replace the filter every 6-12 months, depending on the model and water usage. * Use genuine Aquasana filter cartridges to ensure optimal performance and warranty coverage. * If the water has a slightly smoky or woody odor after replacement, flush the system for a longer period. * If the filter still produces cloudy or discolored water after flushing, contact Aquasana customer support.