How To Resurface A Countertop With Laminate

Laminate is a great way to resurface a countertop because it is durable, affordable, and easy to install. It is also available in a wide variety of colors and patterns, so you can find one that matches your kitchen décor.

To resurface a countertop with laminate, you will need the following materials:

Laminate sheets

Contact cement

A utility knife

A straight edge

A roller

Sandpaper

Once you have gathered your materials, you can begin the resurfacing process.

1. Prepare the countertop. The first step is to prepare the countertop for the laminate. This involves cleaning the countertop thoroughly and removing any dirt or debris. You should also sand the countertop lightly to create a smooth surface for the laminate to adhere to.

2. Cut the laminate. Once the countertop is prepared, you can cut the laminate to size. Measure the countertop and cut the laminate accordingly. Be sure to leave a small overhang around the edges of the countertop.

3. Apply the contact cement. The next step is to apply the contact cement to the countertop and the back of the laminate. Be sure to apply the contact cement evenly and in a thin layer.

4. Install the laminate. Once the contact cement has been applied, you can install the laminate. Carefully align the laminate with the countertop and press it into place. Use a roller to smooth out the laminate and remove any air bubbles.

5. Trim the laminate. Once the laminate is installed, you can trim the edges to create a clean finish. Use a utility knife to score the laminate around the edges of the countertop and then snap it off.

6. Sand the edges. Finally, you should sand the edges of the laminate to smooth them out. Use sandpaper to sand the edges until they are smooth and even.

Resurfacing a countertop with laminate is a relatively easy and inexpensive project that can give your kitchen a new look. By following these steps, you can resurface your countertop with laminate and enjoy it for years to come.